Build idea
Scrap Wood Christmas Tree Wall Art
I made this Share a photo of your version.
A hangable Christmas tree plaque from layered scrap triangles or short staggered boards glued to a thin backer. Keyhole hangers or D-rings keep it flat on the wall.
- Rough size
- About 12 in wide x 18 in tall x 1 in deep
- Wood
- Pine, poplar, or mixed hardwood scrap for the tree layers, 1/4 in plywood or hardboard for the backer
Tools you might use
- Miter saw
- Sanding
- Drill and bits
- Miter saw or handsaw for the staggered boards (or bandsaw/scroll saw for triangle layers)
- Wood glue and clamps or weights
- Random-orbit sander or sanding block, 120–220 grit
- Drill for keyhole hangers or D-ring screws
- Wipe-on oil, clear finish, or paint
Our tool picks for this idea: Clamps · Wood glue
Choosing a sander? Read our sander for cutting boards guide.
Need a miter saw? See our miter saw picks.