Guide
Which V-bit should you use for CNC signs: 60° or 90°?
90°, 60° or narrower: which V-bit to use for CNC signs, from independent guides and bit makers' specs.
Top tools by job
Carve and cut with a CNC
First router bits, V-bits for signs, and the software to drive them.
Where to start
Guide
Which CNC router bits should you buy first?
Upcut, downcut, compression, V-bit and surfacing: which CNC router bits to buy first, from independent guides and a hands-on bit test.
Guide
What free software do you need to run a hobby CNC router?
Design, toolpaths and a sender: which free CNC programs do each, and the limits their makers set, per independent guides.
Other jobs
- Clamp a glue-up
- Cut plywood and long boards straight
- Rip narrow strips on a table saw
- Engrave and cut with a laser
- Clear laser smoke from the room
- Design files without paying
- Drill clean, square holes
- Collect dust and chips
- Sand smooth surfaces
- Drive framing nails
- Route edges and profiles
- Join boards with pocket screws
- Cut curves and shapes
- Trim and fit joints by hand
- Crosscut boards square and at angles
- Measure and mark square lines
Or browse all Top tools.
We pick tools from independent tests and reviews, not our own testing.